Atmel Wireless LAN Access Point Manual de usuario descargar pdf (Pagina 20)

Wireless LAN Access Point Configuration

3.2.2 Using the SNMP Manager

Before using the SNMP Manager to configure the Access Point, verify the Ethernet

station and the Access Point are on the same subnet. The following is the default IP

address and Sub Mask of the Access Point:

Default IP Address: 10.170.254.32

Default Sub Mask: 255.255.254.0

In order to change the IP address and Sub Mask of the Access Point, you must use the

AP Utility Application (only through the USB port). Please refer to Section 3.1.2 for

the IP Address and Sub Mask configuration.

On the Start Menu, choose Start->Programs->Atmel Utilities->AP Configuration-

>AP Configuration to start using the configuration tool.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

Atmel Wireless LAN Access Point Manual de usuario Pagina 20