Atmel ATAVRAUTO100 Manual de usuario descargar pdf (Pagina 7)

Using the ATAVRAUTO100

ATAVRAUTO100 User Guide 2-8

7697B–AUTO–09/07

2.3.2 External crystal Necessary for the CAN network precision, the following crystal frequency allows proper

ATAVRAUTO100 operations

(1)

: 8MHz, 12MHz, 16MHz. The ATAVRAUTO100 comes

with a default 8MHz crystal oscillator (CAN baut rate up to 1MBit/sec).

The LIN master mode clock should always be a crystal or external clock oscillator. Cur-

rently, only 8MHz and 16MHz crystal oscillator is supported.

Figure 2-3. Crystal Oscillator connection.

Note: Only the 8MHz and 16MHz frequency are supported by the CAN and LIN libraries

2.4 On-board

ressources

2.4.1 LIN Connection to the LIN network is made via the LIN connector JP3. The LIN signal must

be connected to the pin 2 of the connector.

Figure 2-4. .LIN And Power-supply Connections to JP3

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Sin comentarios

Atmel ATAVRAUTO100 Manual de usuario Pagina 7